Category: Linux

Scan bus to identify the drives cdrecord –scanbus

active interface ‘eth0’ in dhcp mode dhclient eth0

Monitor the result of some command by looping it an infinite while loop. To quit, press Ctrl+C. Thanks to Sreenath…

Perform an md5sum on a device, like a CD dd if=/dev/hdc | md5sum

You can use this command to convert a Bin/Cue image to an ISO image in a linux system. You may…

Configure ‘eth0’ in promiscuous mode to gather packets (sniffing) ifconfig eth0 promisc

Remove a deb package from the system dpkg -r package_name

Verify the integrity of a rpm package rpm –checksig package.rpm

Burn an ISO image cdrecord -v dev=/dev/cdrom cd.iso

Build a rpm package from a rpm source rpmbuild –rebuild package_name.src.rpm